Maxus T90 Brake Replacement – UK Parts Guide

Maxus T90 brake replacement is straightforward once you have the correct genuine SAIC parts for your specific build. The T90 uses ventilated front discs and solid rear discs as standard, and getting the right pads and rotors depends on your VIN — not just the model name.

Why VIN Matters for T90 Brake Parts

One of the most common mistakes T90 owners make is assuming that “Maxus T90” is enough information to order the correct brake parts. It is not. The T90 is a rebadged SAIC vehicle, and build specification varies by production date, engine variant and market trim. Pad shape, disc diameter and even rear brake type can differ between VINs on what looks like the same model.

Before we dispatch any brake part, we confirm fitment against your VIN so you receive exactly the right component first time. This avoids the returns and refitting costs that come with guessing.

Which Brake Parts You Will Need

A standard T90 brake service typically involves front pads and discs. Rear pads and discs wear more slowly on a pickup, so rear components are usually replaced less frequently. Here is what to consider:

• Front brake pads — replace when friction material is below 2 mm or when a brake wear warning appears
• Front brake discs — replace if scored, lipped or below minimum thickness (stamped on the disc edge)
• Rear brake pads or shoes — depends on your VIN; some T90 builds use rear drums
• Rear brake discs — if fitted, replace when worn beyond the manufacturer’s minimum specification
• Brake calipers and hardware — slider pins, dust boots and caliper brackets are available as genuine parts if seized or damaged

We always recommend replacing pads and discs in axle pairs — both sides at once — for even braking performance.

How to Replace Maxus T90 Front Brakes – Overview

If you or your garage are fitting the parts, here is the general process for a front brake change on the T90:

1. Loosen the front wheel bolts, raise and support the vehicle safely on axle stands.
2. Remove the wheel and locate the brake caliper.
3. Remove the caliper slider bolts (usually two) and lift the caliper off the disc. Support it with wire — do not let it hang by the brake hose.
4. Slide out the old pads and note their orientation.
5. If replacing the disc, remove the caliper bracket bolts and then the disc retaining screw (if fitted).
6. Fit the new disc, refit the caliper bracket and torque to the manufacturer’s specification.
7. Push the caliper piston back using a brake piston tool or a C-clamp with an old pad for protection. Check that the brake fluid reservoir does not overflow.
8. Fit the new pads, refit the caliper and torque the slider bolts.
9. Refit the wheel, lower the vehicle and pump the brake pedal several times before driving.

Bed the new pads and discs in gently over the first few hundred miles — avoid heavy braking from speed.

Genuine Parts vs Pattern Parts

We supply genuine SAIC Maxus brake components, not aftermarket pattern parts. The difference matters. Genuine pads are formulated for the T90’s weight and braking system, and genuine discs are machined to the correct tolerances. Pattern parts may fit physically but can introduce noise, uneven wear or reduced stopping performance — none of which you want on a working vehicle.

You can browse genuine T90 brake components in our Maxus parts catalogue, or contact us with your registration and we will confirm exactly what fits your vehicle.

Trade and Fleet Brake Orders

Independent garages and fleet operators can apply for a trade account for volume pricing on brake parts and other service items. We supply garages across the UK who maintain Maxus and LDV fleets — correct parts, confirmed fitment, delivered by FedEx.

Frequently Asked Questions

Are Maxus T90 brake pads the same as LDV T60 pads?

Not necessarily. The T90 and T60 share a platform but differ in specification depending on build date and variant. Some components cross-reference, but you should never assume compatibility. Give us your VIN or registration and we will confirm exactly which pad fits.

How do I know when my T90 brakes need replacing?

Common signs include a grinding or squealing noise under braking, a pulsing brake pedal (warped discs), increased stopping distance, or a dashboard brake wear warning. If in doubt, have a garage measure pad thickness and disc condition.

Can I order T90 brake parts using just my registration number?

Yes. Enter your registration on our registration lookup and we cross-reference it against SAIC’s parts data to confirm the correct components for your vehicle. This is the simplest way to avoid ordering the wrong parts.

Do you deliver brake parts across the UK?

We do. All orders are sent via FedEx with UK-wide coverage. Check our shipping information page for current delivery timescales.

Do you supply brake fluid and other service items?

Yes — we stock the full range of genuine Maxus service parts including brake fluid, filters, belts and suspension components. Everything is available through the parts catalogue.

Need genuine Maxus T90 brake parts? Enter your registration or VIN on our website, or contact us and we will confirm the correct parts for your vehicle and get them dispatched.